Robot Love DTF (320°)
HOW TO APPLY:
- Temp: 320°
- Pre-press 5-10 seconds to remove moisture/wrinkles
- Press for 15 seconds medium/high pressure
- Let cool for 15-20 seconds and peel warm/cool (I suggest rubbing transfer with a microfiber cloth to help cool it)
- Cover with parchment paper (for a matte finish) or teflon sheet (for a glossier finish) and press again for 5-10 seconds
*Actual product colors MAY vary from mock up photo due to device display capabilities and monitor settings. Every print is different and has different color variations, especially in the watercolor graphics and/or after heat pressing. Please be aware of this before purchase as we DO NOT accept returns or exchanges for our products. We are not responsible for transfers that are pressed incorrectly. Please make sure you are using the correct material, color, and press settings prior to pressing your transfer.
Due to the increase of trademark registration applications and infringement allegations, you are solely responsible for determining if phrases used in any design are trademarked or have any legal limitations for your intended usage. You assume full responsibility and may publicly post at your own risk.